Samson Servo 200 2-channel Power Amplifier

2-channel Power Amplifier, 2 x 100W at 4 Ohms, with Relay-controlled Power-on, Variable-speed Fan Cooling

The Samson Servo 200 stereo power amplifier has been designed to provide robust, clean output with low distortion and wide dynamic range, along with the dependability demanded by the most professional audio engineers and installers. The convenient 2 rack-space design is compact and yet there's plenty of power available with 2 x 66 watts at 8 ohms, and 2 x 100 watts at 4 ohms over the full frequency spectrum, from 10 Hz to 55 kHz.For mono applications, a Bridge mode links both channels of the amplifiers, thus providing even more single-channel power, with a power rating of 200 watts into an 8-ohm load.

Input connections are available for both unbalanced RCA connections and balanced 1/4" TRS connections. For the outputs, the Servo 200 amplifier provides standard 5-way binding posts and 1/4" phone jacks. Front-panel controls and displays include a power switch with an LED indicator, as well as independent left and right channel input level controls. To help you set the correct operating levels, the Servo 200 amplifier includes front panel Signal, Peak, and Protection LED indicators. There's also a ten-segment VU meter to help you set a good operating level. Like all serious power amplifiers, the Servo 200's internal electronics are based around a serious power core, with an oversized toroidal transformer and large extruded heat sink. To keep the Servo 200 amplifier running cool, the design employs twin internal wind tunnels with forced-air cooling via two temperature-sensitive, variable-speed fans, which greatly reduce the chance of thermal and overheating problems. Multi-stage protection for power-up, over-heating, over-current, short circuit, low output impedance, and DC voltage, assures high reliability under the most demanding situations. The Servo 200 amplifier is road-tough with its all-steel chassis and 19" rack-mount design. The Servo 200 amplifier is ready for a life on the road, or to make its home in a fixed installation. Optimized for live sound venues, houses of worship, commercial installations, and for driving small and medium-sized live PA systems, the Servo 200 amplifier will deliver reliable power from gig-to-gig, venue-to-venue, and day-to-night.

Features:

• Rugged servo-controlled 3-space 19" rackmount stereo/mono power amp.
• 100 watts per channel @ 4 ohms (stereo)
• 200 watts into 8 ohms (bridged mono mode)
• 20Hz to 50kHz frequency response for maximum sonic performance
• Electronically balanced 1/4" inputs
• 1/4" and binding post outputs
• Relay-controlled "power-on" circuitry prevents speaker "thumps"
• Front-panel Clip, Idle, Protection and Power lights
• Unique bipolar output stage for enhanced audio performance
• Independent left/right input level controls with 41 detents for precise level matching
• Twin internal wind tunnels with forced-air cooling via two temperature-sensitive provide quiet performance in critical applications
• All-steel chassis with lightweight anodized aluminum heat sink and matte black finish